Products

Product information

Analytical instrument parts
  • Material：A5056,A1050
  • Dimensions：Φ100×130L
  • TIG welding of aluminum
Analytical instrument parts
  • Material：SUS303
  • Dimensions：40×28×28
  • Full circumference machining
  • Geometric tolerance of each part 0.02
Vacuum equipment parts
  • Material：A5056
  • Dimensions：Φ360×150
  • Full surface appearance equivalent to Ra 1.6 (monthly production quantity: 400 units)
Aircraft equipment parts
  • Material：A5052
  • Dimensions：180×180×80
  • Full circumference machining and thin-wall shape processing
Vacuum equipment parts
  • Material：A5056
  • Dimensions：Φ260×280
  • Tolerance of each inner/outer diameter dimension is 0.03 or less
Analytical instrument parts
  • Material：S45C
  • Dimensions：Φ200×250
  • R-face machining by simultaneous 5-axis machining
  • Internal diameter all around Ra 0.8 (lathe machining)
Vacuum equipment parts
  • Material：A5056
  • Dimensions：Φ340×190
  • Internal diameter multiple thread machining by lathe
Analytical instrument parts
  • Material：C1020
  • Dimensions：Φ300×50
  • Airtightness
  • Brazing
  • Soldering
  • Pipe bending
  • Each part processing - welding - secondary processing - leak test - surface treatment
Analytical instrument parts
  • Material：C3604・C1100
  • Dimensions：Φ170×45
  • Vacuum resistance(10⁻10Pa or less)
  • Water pressure resistance
  • Soldering
  • Each part with sealing surface
  • Each part processing - welding - secondary processing - leak test - surface treatment
Analytical instrument parts
  • Material：SUS304
  • Dimensions：250×200×200
  • Vacuum resistance(10⁻10Pa or less)
  • TIG welding
  • Wire cutting
  • Each part with sealing surface
  • Each part processing - welding - secondary processing - leak test
Vacuum equipment parts
  • Material：A5056
  • Dimensions：Φ200×80
  • Tolerance of each inner/outer diameter dimension is 0.03
  • Coaxiality of each part 0.02 or less
Analytical instrument parts
  • Material：SUS304
  • Dimensions：Φ50×80
  • Vacuum resistance(10⁻10Pa or less)
  • TIG welding
  • Each part with sealing surface
  • Each part processing - welding - secondary processing - leak test
Analytical instrument parts
  • Material：SUS304
  • Dimensions：Φ10×100
  • Vacuum resistance(10⁻10Pa or less)
  • Pipe bending
  • TIG welding
  • Outer groove machining part seal surface
Vacuum equipment parts
  • Material：A5056
  • Dimensions：Φ180×150
  • Full surface appearance equivalent to Ra 1.6 (monthly production quantity: 200 units)
Analytical instrument parts
  • Material：SUS304
  • Dimensions：26×26×60
  • Vacuum resistance
  • Brazing
  • Each part with sealing surface
  • Each part processing - welding - secondary processing - leak test
Analytical instrument parts
  • Material：SUS304
  • Dimensions：Φ60×200
  • Vacuum resistance(10⁻10Pa or less)
  • TIG welding
  • Bellows welding
  • Each part with sealing surface
  • Each part processing - welding - leak test
Analytical instrument parts
  • Material：SUS310
  • Dimensions：Φ62×17
  • Ra 0.2 hairline hand finishing
  • Center with φ1 pole
Analytical instrument parts
  • Material：C1720
  • Dimensions：50×50×15
  • Parts for ultra-high vacuum
  • Various geometric tolerances available
Analytical instrument parts
  • Material：A7075
  • Dimensions：30×30×30
  • Processing after wire machining